Shot Support

To add a new device to your Shot Scope account, follow these steps:Open the Shot Scope app and log into your account.Navigate to the 'More' section (usually found in the bottom menu).Tap 'Add New D...

To turn on the laser simply press the power button (the button nearest the eyepiece) for a second to power on the laser. Please note that the laser will turn off automatically after 10 seconds of i...

To switch the laser from yards to metres please hold down the 'M' button for 3 seconds. The screen should now show an M rather than a Y on the screen next to the distances.

Press the “MODE” button at the top of the laser to change measuring mode.

Adaptive Slope Technology provides you with compensated distance based on whether a target is uphill or downhill from your location. For example, a 156.8 yard uphill shot of 7 degrees really plays ...

Continuous Scan Mode - M1Hold down the POWER button while scanning, the data on the LCD screen will change as you move and change target. Golf Mode - M2Press the POWER button once while aiming the ...

You need to remove the plastic coating around the battery inside the device. Once the plastic has been removed and the battery has been re-inserted the device will power on and function.

To change the units your yardage is displayed in in any of the modes, simply press the Mode button for 3 seconds and this will change the units from Yards to Meters and vice versa.

The laser battery lasts for approximately 5,800 measures. When the low battery symbol appears on screen when viewing through the eyepiece, this means the battery is low and it should be replaced. T...

You can customize the yardage display from Red to Black to ensure you can read the display clearly in all settings. To change from Red to Black simply use the switch on the right side of the laser.